| BACnet MS/TP slave, standard Modbus and user-defined RS-422 / 485 communication protocols |
| Compatible with software and DDC of major brands on the market; remote I/O and converter function available when connected with a PLC with I/O point extension |
| Isolated power and communication provide strong noise immunity; built-in 120 ohm terminal resistor switch and feed-through terminals with spring plugs |
| Data transmission settings via software, no complex programming required |
| Modbus TCP protocol |
Modbus TCP connections:
|
| Smart data exchange |
| RTU mapping |
| Simple firewall |
| Email alarm |
| PROFIBUS DP slave protocol |
| Supports GSD files identification and cyclic data transmission IN/OUT data mapping |
| Standard Modbus communication and user-defined RS-422 / 485 communication protocols |
| Two sets of independent RS-422 / 485 communication interfaces |
| Isolated power and communication provide strong noise immunity; built-in 120 ohm terminal resistor switch and feed-through terminals with spring plugs |
| Data transmission settings via software, no complex programming required |
| Applied as PLC communication ports for program uploading/downloading and monitoring |
| CANopen protocol |
| Able to connect max. 110 slaves |
| Various PDO and high-speed SDO transmission |
| NMT slave, Heartbeat, Emergency and more protocols |
| DeviceNet protocol |
| Able to connect max. 63 slaves |
| Supports EDS files identification and cyclic data transmission |
| Max. network connection distance: 500 m |
| RTU mapping |
| Modbus TCP slave protocol |
| Able to connect 8 DVP-S Series analog I/O modules |
| Able to connect digital I/O (256 points) modules |
| RS-485 port supports max. 32 Modbus slaves |
| Smart PLC if-then function |
| Smart monitor function |
| Supports webpage setup and on-line monitoring |
| Serial virtual COM available |
| DeviceNet protocol |
| Supports EDS files for identification and cyclic data transmission |
| Able to connect 8 DVP-S Series analog I/O modules |
| Able to connect digital I/O (256 points) |
| RS-485 port supports max. 8 Modbus slaves |
| CANopen protocol |
| Able to connect 8 DVP-S series analog I/O modules |
| Able to connect DVP-S series digital I/O modules (256 points) |
| PROFIBUS DP slave protocol |
| Auto-detects baud rate, max. baud rate: 12 Mbps |
| Supports GSD files for identification and cyclic data transmission |
| Able to connect 8 DVP-S Series analog I/O modules |
| Able to connect digital I/O (256 points) |
| RS-485 port supports max. 16 Modbus slaves |
| Modbus protocol |
| Able to connect 8 DVP-S Series analog I/O modules |
| Able to connect digital I/O (256 points) modules |
| Max. baud rate: 115.2 Kbps |
| EtherCAT protocol |
| Able to connect 8 DVP-S series analog I/O modules |
| Able to connect DVP-S series digital I/O modules (256 points) |
